Pro Steel Pickguards

Super Mirror HSS Stratocaster Stainless Steel Pickguard

World-Wide Tracked Delivery.

Classic fantastic mirror, in real deal stainless steel. The guard does all the talking. Great with any knobs you choose. Polished to a very high mirror bling, non-magnetic stainless steel, 18% Chromium content, corrosion free. Edges rolled & polished. Mirror protected by an easy peel skin.

PLEASE NOTE: It's a Super Mirror finish. Be aware that like any mirror surface under physical use, can & will develop very fine scratching from playing, less if using fingers. But stainless steel is more resilient than a plastic mirror guard which scratches easier & suffers clouding in the plastic. Steel still maintains a high mirror finish, and any fine marks through normal handling and playing are not so noticeable from a few paces away.

ALSO, after a lot of use, this guard can be re-polished back to a new mirror surface. Pro-Steel are very careful with handling and preparation to get you the best Mirror Guard delivered.

Mirror Stainless Steel - Made to Last.

Light weight, very rigid, only 1.0 mm thick, weighs just near 2 plastic guards.

The Super Mirror is now available for other Guards. Send us an email inquiry if you don't see your guard type.

*Video - Easy Change Pickuard & Pickups

Strong, lightweight and resonant at 1.0mm thick. Will not tarnish or corrode.

• Stainless steel 304 grade non-magnetic
• Also acts as a noise shield
• Thickness - 1mm or 3/64"
• Weight - 234g or 7.41 ounces (3ply plastic 110g)
• Screws included
• Single slots will fit Bridge F-Spaced & Trembuckers
• Humbucker slot also fits larger hot trembuckers
• Humbuckers will raise up to 8 mm (5/16") above guard top

* List of Fender humbuckers that will fit a pickguard humbucker slot with 2 mount holes

Stainless Steel guards are very effective as an EMF noise shield.

Your electronics will be more stable at higher volumes, and will not interfere with your original tone.

In fact, these guards work very well on the best guitars for recording.

Fits - Any genuine Fender USA & MiM Strats from 1986 to present. Any Strat which a current Fender Strat guard fits. Before '86 there may be deviation in some Fender screw hole placements. Or any Strat SSS when bridge single coil changed for humbucker

* HSS Stratocaster Wiring Pickup Diagram

Squier Strats: Will fit current Squiers. If older than '86 there maybe 1 or 2 screw holes a little off center. That's usually no problem, the screws supplied will easily find a hole.

If you need a hole for a Mini Toggle Switch let me know. I can do this free of charge.

Other Super Mirror Pickguards are NOW completed & available. See below...some of these may not yet be listed in our shop to buy, if so, please send me your email inquiry to order (top left):

• Tele Std SS
  
• Tele Std SS LEFT
  
• Tele SH (neck square H for covered humbucker)
  
• Tele SH (molded H slot for un-covered humbucker)
  
• Tele SH (NO Control Plate cut-out, molded H for un-covered humbucker)
  
• Tele HH (square H for covered humbucker)
  
• Tele HH (NO Control Plate cut-out, same as Jim Root Tele)
  
• TELE JIM ROOT
  
• Tele J5 (John 5 HH, including matching 2 hole only Control Plate)
  
• Tele SSS (mid S for Strat single coil pickup)
  
• Tele SSS (mid S for Tele Std chrome single coil to match neck pickup)
  
• Tele S (Esquire, no neck pup)
  
• Tele H. P90 (Bridge humbucker, P90 neck)
  
• Tele S. P90 (Bridge Std Tele single coil, P90 neck)
  
• Tele Std Control Plates
  
• Strat SSS Std
  
• Strat SSS Std LEFT
  
• Strat HSS
  
• Strat HSH
  
• Strat HH
  
• Gibson SG
  
• Gibson SG.X (Extended)
  
• Charvel So-Cal
  
• G&L SSS
  
• G&L HSS

Item added 12 April 2017

Ask a question •   Share